Category: Uncategorized

Stuck, choked, plugged and disgusting, those are the words that flow through your mind when you walk into the bathroom and discover the toilet won’t flush. How can you get you to get toilet unplugged before your floor ends up covered in dirty water?

The Plunger – This is the number one choice of everyone when it comes to getting rid of a toilet bowl choke. There are two basic kinds of plungers, one designed for sinks and one for toilets. You want to make sure you have one designed for your toilet before you get started.

You can tell the difference in the plungers for their shape. A toilet bowl plunger features an extended flange to reach slightly into the toilets drain and sealing it. A plunger for a sink or bathtub has a smooth cup with no flange.

Push the plunger into the toilet’s drain and then push forcibly to try to unstick the clog. The clog usually consists of fecal matter and toilet paper. A few quick pushes on a plunger will often loosen the drain and have your toilet flushing properly.

If you notice your plunger is not getting a tight enough seal, you can use this old plumber’s trick. Put a little Vaseline (petroleum jelly) around the edge of the plunger. This can help improve the seal and let you clear the drain.

NOTE: Do not put chemicals in your toilet bowl to clear a clog. They can splash onto your skin or eyes easily causing injuries. Chemicals and plungers must NEVER be used together.

Hot Water Trick – Since most choked toilets are caused by tissue paper and waste, hot water can be magical. The hot water causes the paper to soften and dissolve and will make the poop softer, too. This allows the drain to open for the next flush. You can use the hot water to soften the plug and then use the plunger to quickly open the drain.

Homemade Drain Cleaner – If you want to try something a little more aggressive, while avoiding dangerous chemicals, you can mix your own drain cleaner. Use 1 cup of baking soda and two cups of vinegar. Allow the ingredients to soak in the toilet bowl for at least 15 minutes, then use hot water to flush the mixture down the drain. This combination can help soften organic waste allowing the drain to clear. It is safe to use the plunger after using this mixture.

ShopVac – Do you have a ShopVac out in the garage? We suggest using this idea as a last resort prior to calling a plumber. You can use the ShopVac’s hose to attempt to vacuum out water and waste to clear the plug. This works great when the choked drain is caused by a stuffed animal or toy. The suction will grab onto the item allowing you to pull it out, instead of pushing it further down the drain.

Snakes and Plumbers – If you have a short hand-snake for clearing drains, you can give it a try. This metal cable will attempt to unblock the drain but is usually not long enough for deeper issues.

When everything else fails, it is time to call a plumber. Your choked toilet may not be caused by an issue near the home. It could be caused by an obstruction in the sewage line. If you notice other drains are not working, it indicates the issue is not at the toilet, but further down the line. This is the time a professional plumber is needed. They can use their powered snake to clean the drain and can check to make sure the sewage line is not damaged.

Hopefully, these suggestions help you unchoke your toilet without needing to call the plumber. To learn more, you can contact sg1 plumber.

When we hear of the word “locksmith” what often comes to mind is someone who has a bunch of keys around his waist waiting for someone to call them.

However, the truth of the matter is that locksmith technology has evolved beyond the old lock and key. If you search for it online, you will see that there are three types of locksmith services. These are residential, industrial, and auto.

According to 247DC locksmith, residential locksmith services basically involves helping people who get locked out of their own homes or being unable to open doors in their house. In the old days, a locksmith only needed a master key to open them all. However, there are locks that involve punching numbers on a keypad. Still, there are high-end locksmith systems that require biometric information like thumbprint and eye scan.

The thing about high-end systems is that they all can suffer different glitches. A residential locksmith has to be familiar with different types of locksmith and security systems.

On the other hand, an industrial locksmith also has to be familiar with different types of lock and security systems, however, they have to take it up a notch, that is, they have to know how to give different people different access levels. To this end, anyone who is working for businesses as a locksmith has to be familiar with computer networking systems.

An auto locksmith, meanwhile, has to be familiar with the different lock systems of different models vehicles. While all cars respond to regular keys and remote control transponder keys, these aren’t the only locks a car can have.

We do hope that you never have to hire a locksmith. However, things can and do happen and you will need to call someone to open the door for you.

No matter if you have to hire a residential, industrial, or auto locksmith, there is no doubt that hiring one is expensive. And you can expect to pay at least $100 especially if it’s an emergency service.

Replacement of parts cost even more. For example, replacing your transponder key typically costs $150. This is because a blank unit has to be programmed to match the frequency of your vehicle.

If you have insurance though, the cost might not be much of a worry. But just like anything else, different locksmith services differ in their prices as well as the quality of their service.

In order to find someone, do a Google local search by specifying the type of locksmith you need and add in your local area. Before hiring anyone, make sure to read the reviews and get a feel for what others have to say about the singapore locksmith service.

Choosing someone to fix your lock and security system is not rocket science, but you do need to be careful because there are people out there who are only there to rip you off.

Before asking anyone to come over, make sure you agree on the price. This is to ensure you don’t get any surprise charges.

We are a fully licensed air-conditioning service and repair company specializing in all models of Panasonic and Singapore Daikin air conditioners. Panasonic is a Japanese brand that has been manufacturing air conditioning systems since 1950. For decades their excellent, high-quality products have been distributed all over the world. Their air conditioning units are used to cool millions of houses, businesses, factories, and commercial buildings across the globe.

We provide our services to homeowners and commercial building owners within the Singapore area and have a dedicated department specifically for this manufacturer. Our expert team of air conditioning technician are highly qualified and trained to fix, repair, and service Panasonic air-conditioning units. When an air conditioner is properly maintained its service life is extended which saves you money.

Air conditioning is essential for all households and buildings in Singapore because of the hot weather we experience here. Air conditioning units keep the air inside buildings cool and clean and it is our job to ensure that they are fully functional and operating at an optimum level all the time. In a tropical country like Singapore, it is particularly important to keep the fan coil units working at an optimum level. We offer a complete range of air conditioning services for cooler and cleaner air. A general air conditioning servicing package includes checking, cleaning and maintaining the fan coils and outdoor condenser to prevent leaks and improve the efficiency of the unit.

We use only the best, reliable methods of repair to fix any issue you may be experiencing with your Panasonic air conditioner and we take pride in delivering top quality workmanship and customer service to suit client needs. Panasonic delivers all types of air conditioning units in different sizes and cooling power for use in all types of spaces from small apartments to huge factories and commercial buildings. Their mission is to use the latest technology in their products in order to make life more comfortable for people, whether they are working or relaxing at home.

If your air conditioner needs attention, whether it is a repair, maintenance service, new installation, or an AC overhaul, our dedicated Panasonic air conditioning specialists are fully equipped to provide you with the necessary services. We have numerous favorable reviews from satisfied customers to testify to our excellence of service. You can trust us to get the job done right the first time with a guarantee to back our promises. If your air conditioner is not cooling your home or office as well as it should or you hear strange noises coming from the system, give us a call and we will send out one of our technicians to have a look and find out what the problem is. We understand that in today’s life everyone has a very full schedule which is why we will try our best to fit in with the time you have available for a technician to call.

Whether your Panasonic air conditioner needs a service, a repair, or a complete overhaul, our skillful air conditioning specialists will not only meet but surpass your expectations with their high standard of services devoted to keeping our clients satisfied and happy. Follow us for more aircon services tips.

The life of an aircon depends on how many hours you use it in a day and how much care you take. Experts are of the opinion that it is ideal to clean the aircon at least once a week because the filters absorb a lot of dust and dirt when the AC is in action. But if you are not able to clean the aircon in such short periods of time, you may as well get an aircon chemical wash. It is one of the best ways to keep the aircon clean and improve the longevity of the AC. Here are a few reasons why aircon chemical washing is important for every AC unit;

1. Improves the electrical efficiency

It has been proved time and again that a clean aircon can improve the electrical efficiency. This will help to save money because you will be cutting down on the electrical bill every month. So, when you get a chemical wash done, it cleans the aircon inside out. This increases the efficiency of the aircon because there are no dust and dirt to prevent the free flow of air. That is why it is wise to opt for an aircon chemical wash after every few months to help save a lot of energy and also a lot of money in the process.

2. Prevents mold growth

According to Coolbest aircon servicing, some of the aircon units tend to store moisture inside or make the walls slightly damp. This can become a gateway for the growth of molds and that is always unwanted. Aircon chemical wash will prevent the growth of molds once and for all. The chemicals and the ingredients that are used to clean the unit are powerful enough to keep molds away from the system. Mold is never good for any house or office and this is one way to make sure that they stay away from your family.

3. Improves aircon life

In addition to making the aircon electrically efficient, a chemical wash will also improve the longevity of the machine. In fact, the maintenance cost of the aircon will also come down if you get a chemical wash periodically. As the aircon lives longer, you will not have to think of replacing it anytime soon. Also, the chances of the aircon breaking down become significantly low.

4. Gives cooler and high-quality air

When the air filters in the aircon are cleaner, they are bound to give cooler air to the room. You will often notice that the AC does take a bit longer to cool the room down. This happens when the filters get clogged because of the accumulated dirt. An aircon chemical wash will clean them down and not only provide cooler air but the quality of air will also improve in this process. Regular cleaning of the filters may not be possible but a single chemical wash can do the trick.

So, if you have aircon units at home or in your office, make sure it gets a chemical wash after every few weeks to keep it safe and healthy.

Webplate is a free UX project bringing the best of the web together into one great package. Download the zip file below, or if you really want to get into the nuts and bolts then fork the project on github.

Webplate has been registered on Bower and will install the latest stable release. This is a great way to maintain and mange Webplate but note that your project folder will need to be backed up and copied back. Each new Bower update will write over your current project directory which is kind of a bad thing. To install, run the following command.

Everything from a robust responsive layout engine, to global button elements, customizable forms, simple modals and support for icon fonts. Webplateincludes jQuery, Modernizr, Velocity.js, Hammer.js and Typeplate by default and has a ton of extra tools and features to access. Best of all these elements will look and act the same on all devices.

All the plugins below are a part of Webplate by default but have been extracted out as separate lightweight files that you can use in other projects. Click on the links below to see how they are implemented.